Cisco 350-001认证考试题库

RackYYSw2:
VLAN Name Status Ports
1 default active        F0/4,F0/5,F0/7,F0/8,F0/9,F0/11,F0/12,F0/13,F0/14,F0/16,F0/17
F0/18,Gi0/1,Gi0/2
50 VLAN_BB2 active   F0/6, F0/10
100 VLAN_100 active   F0/1, F0/2
200 VLAN_200 active   Po10

RackYYSw3:
VLAN Name Status Ports
1 default active          F0/1,F0/2,F0/3,F0/4 F0/5, F0/6, F0/7,F0/8,F0/9,F0/11,F0/12,F0/13, F0/14, F0/15, F0/16,F0/17,F0/18,Gi0/1,Gi0/2
60 VLAN_BB3 active    Fa0/10
200 VLAN_200 active

RackYYSw4:
VLAN Name Status Ports
1 default active        F0/1,F0/2,F0/3,F0/4,F0/5,F0/6,F0/7,F0/8,F0/9,F0/10F0/11,F0/12
F0/13,F0/14,F0/15,F0/16,F0/17,F0/18,Gi0/1,Gi0/2
200 VLAN_200 active   Po10
Verify: show vlan brief
When u done, u must verify careful.
做完的时候，可以仔细核对下，注意大小写,我做的时候只要是二层的端口全使用Swithport mode access

1.3 Port-channel between Sw1 a Sw2
 Sw1 and Sw2 layer 3 Ether channel use port-channel 21 only
 Assign YY.YY.100.1/24 to Sw1 Port-channel 21
 Assign YY.YY.100.2/24 to Sw2 Port-channel 21
 ensure interface F0/23 and F0/24 are channel member for both Switch
 Do not reply on PAgP or LACP to facilitate the connection
 Verify layer 2 and layer 3 connectivity via the channel link

RackYYSw1:
interface range FastEthernet0/23-24
shutdown
no Switchport
channel-group 21 mode on
no shutdown
interface Port-channel21
ip address YY.YY.100.1 255.255.255.0

RackYYSw2:
interface range FastEthernet0/23-24
shutdown
no Switchport
channel-group 21 mode on
no shutdown
interface Port-channel21
ip address YY.YY.100.2 255.255.255.0
Verify: show vtp status; show etherchannel summary; show etherchannel port-channel;

1.4 Port-channel between Sw1-Sw3 and Sw2-Sw4
 Sw1-Sw3 Sw2-Sw4 layer 2 Ether-channels use port 10 only F0/19 and F0/20 are members of the switches
 On Sw2 and Sw4 assign all interface in the EC as static-access port on VLAN_200 unconditional enable PAGP to facility the connection
 verify layer 2 connectivity via the channel link

RackYYSw1:
interface range FastEthernet0/19-20
shutdown
Switchport trunk encapsulation isl
Switchport mode trunk
channel-group 10 mode desirable
no shutdown

第二部分：IGP和BGP
IGP
2.1 OSPF Bbackbones
 The link between Sw1 and Sw2
 All interface in VLAN_100 on Sw1 Sw2 R1 and R2
 R3 G0/0 and G0/1 and the fa0/3 on Sw1 and Sw2
 Loop back 0 interface on Sw1 Sw2 R2 and R3
 Verifying that all OSPF neighbor have built their adjacencies

RackYYR1:
Router ospf YY
network YY.YY.12.1 0.0.0.0 area 0
network YY.YY.21.1 0.0.0.0 area 0

RackYYR2:
Router ospf YY
network YY.YY.2.2 0.0.0.0 area 0
network YY.YY.12.2 0.0.0.0 area 0
network YY.YY.21.2 0.0.0.0 area 0

RackYYSw1:
Router ospf YY
network YY.YY.7.7 0.0.0.0 area 0
network YY.YY.12.254 0.0.0.0 area 0
network YY.YY.13.2 0.0.0.0 area 0
network YY.YY.100.1 0.0.0.0 area 0

RackYYSw2:
Router ospf YY
network YY.YY.8.8 0.0.0.0 area 0
network YY.YY.21.254 0.0.0.0 area 0
network YY.YY.31.2 0.0.0.0 area 0
network YY.YY.100.2 0.0.0.0 area 0

RackYYR3:
Router ospf YY
network YY.YY3.3 0.0.0.0 area 0
network YY.YY.13.1 0.0.0.0 area 0
network YY.YY.31.1 0.0.0.0 area 0
Verify: show ip ospf interface brief; show ip ospf neighbor

2.2 OSPF over NBMA
 OSPF area 11 consist of the follow interface and attributes
 The Frame Relay network between R3 R4 R5
 Loop back 0 on R4 and R5
 VLAN_55
 Ensure there is no DR/BDR

RackYYR3:
interface s0/0/0.3
ip ospf network point-to-multipoint non-broadcast
Router ospf YY
network YY.YY.11.3 0.0.0.0 area 11
nei YY.YY.11.4
nei YY.YY.11.5

RackYYR4:
interface s0/0/0.4
ip ospf network point-to-multipoint non-broadcast
Router ospf YY
network YY.YY.4.4 0.0.0.0 area 11
network YY.YY.11.4 0.0.0.0 area 11

RackYYR5:
interface s0/0/0.5
ip os net point-to-multipoint non-broadcast
Router ospf YY
network YY.YY.5.5 0.0.0.0 area 11
network YY.YY.11.5 0.0.0.0 area 11
network YY.YY.55.254 0.0.0.0 area 11
Verify: show ip ospf interface brief; show ip ospf neighbor

更多的关于Cisco 350-001 GB2312-LAB 认证考试题库请到Pass4side。
Pass4side 近期更多的跟新科目：Cisco 350-001-LAB 考试,Cisco 642-731 考试，Cisco 646-671 考试和ISEB BH0-007 认证考试。