F5-Networks F50-521题库最新更新，Pass4side提供最新的免费的认证资讯下载。

1. Where is the load-balancing mode specified?
A. within the pool definition
B. within the node definition
C. within the virtual server definition
D. within the pool member definition
Answer: A

2. Assume a virtual server has a ServerSSL profile. What SSL certificates are required on the BIG-IP?
A. No SSL certificates are required on the BIG-IP.
B. The BIG-IP's SSL certificates must only exist.
C. The BIG-IP's SSL certificates must be issued from a certificate authority.
D. The BIG-IP's SSL certificates must be created within the company hosting the BIG-IPs.
Answer: A

3. The incoming client's IP address is 205.12.45.52. The last five connections have been sent to memebers C,D,A,B,B.
Given the virtual server and pool definitions and the statistics shown in the exhibit, which member will be used for the next connection?
 
A. 10.10.20.1:80
B. 10.10.20.2:80
C. 10.10.20.3:80
D. 10.10.20.4:80
E. 10.10.20.5:80
Answer: D

4. When upgrading a BIG-IP redundant pair, what happens when one system has been updated but the other has not?
A. Synching should not be performed.
B. The first system to be updated will assume the Active role.
C. This is not possible since both systems are updated simultaneously.
D. The older system will issue SNMP traps indicating a communication error with the partner.
Answer: A

5. Assume a client's traffic is being processed only by a NAT; no SNAT or virtual server processing takes place. Also assume that the NAT definition specifies a NAT address and an origin address while all other settings are left at their defaults. If a client were to initiate traffic to the NAT address, what changes, if any, would take place when the BIG-IP processes such packets?
A. The source address would not change, but the destination address would be translated to the origin address.
B. The destination address would not change, but the source address would be translated to the origin address.
C. The source address would not change, but the destination address would be translated to the NAT's address.
D. The destination address would not change, but the source address would be translated to the NAT's address.
Answer: A

6. If a client's browser does not accept cookies, what occurs when the client connects to a virtual server using cookie persistence?
A. The connection request is not processed.
B. The connection request is sent to an apology server.
C. The connection request is load-balanced to an available pool member.
D. The connection request is refused and the client is sent a "server not available" message.
Answer: C

7. Assuming other fail-over settings are at their default state, what would occur if the fail-over cable were to be disconnected for five seconds and then reconnected?
A. As long as network communication is not lost, no change will occur.
B. Nothing. Fail-over due to loss of voltage will not occur if the voltage is lost for less than ten seconds.
C. When the cable is disconnected, both systems will become active. When the voltage is restored, unit two will revert to standby mode.
D. When the cable is disconnected, both systems will become active. When the voltage is restored, both systems will maintain active mode.
Answer: C
Pass4side有更多更新科目题库分享：F50-506 认证，350-050 认证，F50-522 认证和JK0-016认证。世界第一品牌Pass4side帮助你轻松通过IT认证考试！